Have you wanted to have an On-Board Glow Driver that doesn't require ANY Radio Adjustments? How about one that you just plug in and go fly?

We have done just that... Introducing our new Push Button Glow Driver. Simply plug it in and mount it and your ready to go, it's that simple. Works directly from your Rx to get its power, so you can plug it in to it's own channel or "y" harness it in to any channel. With a working input voltage of 4.8v - 7v, this unit will work on just about every Helicopter setup out there.

The remotely mounted push button has to be pressed in order for the Glow Driver to start working. Once pressed, you will get 10 seconds of glow time and then automatically shut itself off. With an 8" Lead for the Rx and 8" 18AWG Silicone Wire with a Ring Terminal for Ground and Alligator Clip for your Glow Plug, you can mount this unit just about anywhere and with a 12" long lead on the Push Button itself, there is no need to reach under the Canopy to start your Heli. Mount the Push Button anywhere you want to up to 12" away from the actual Glow Driver.

It's truly a "PLUG-N-FLY" setup...

Min. Input Voltage: 4.8v
Max. Input Voltage: 7v
Output Voltage: 1.5v
Length of Lead Plugs: 8"
Length of Button Lead Plug: 12"
Plug Type: Universal, Ring Terminal, Clip
Size: 38mm x 23mm x 9mm
Installation Guide