You have asked for it and we have delivered. This is our new CCPM Trio Voltage Regulator. We have combined our Flex Reg Pro, Safe Switch and Igniter all into one unique package, so no need to worry about installation space, as everything is all together.

This unit works just the same as our regular Flex Reg Pro, on how the voltage is supplied to the Rx and Cyclic Servos, but it has Igniter and Safe Switch built in. The Push Button for the Igniter, Status LED's and Switch/Pins to turn the regulator on/off can be remotely mounted up to 12" away from the regulator. There are 2 choices available, Switched Version or Pin Version. The Switch Version has a small Mechanical Switch located on the end of the Remotely Mountable Switch Board or the Pin Version which has a set of pins to short out to turn the unit off (jumper included).

This unit will allow upwards of 11.1v input from an array of battery technologies, (Ni-Cd, Ni-Mh, Li-Ion and Li-Po). Output Voltage is user adjustable within a range based on the input voltage supplied to the unit. With a 7.4v input, the Voltage range can be set anywhere from 4.8v - 6.5v and with an 11.1v input, you can go upwards of over 8.5v.* The best way to set the Voltage Output is through an already connected Electronic Device (ie... GV-1) that displays Voltage. Otherwise any Volt Meter would work fine.

Pin Version includes Bind Plug for On/Off operation.

Unit comes packaged with 3 x 6" Male to Male, 22AWG Servo Connectors to connect to your Rx.