Closely similar to our 6v and 6.2v Voltage Regulators, our new Adjustable Voltage Regulator is going to be a top runner for Voltage Regulator needs. This unit will allow upwards of 11.1v input from an array of battery technologies, (Ni-Cd, Ni-Mh, Li-Ion and Li-Po). Output Voltage is user adjustable within a range based on the input voltage supplied to the unit. With a 7.4v input, the Voltage range can be set anywhere from 5.2v - 6.5v and with an 11.1v input, you can go upwards of over 8.5v.* The best way to set the Voltage Output is through an already connected Electronic Device (ie... GV-1) that displays Voltage. Otherwise any Volt Meter would work fine.

The onboard switch is designed not to fail during flight. If a short or overload occurs while the Regulator is in the on position, the Regulator will remain in the on position.

Also built into the Regulator is a 5v relay for use with Gyro / Tail Servos that are suggested to use an input of 4.8v - 5.1v.

The Unique design of the Heatsink with ULTRA-THIN Fins allows for super fast dissipation of heat and makes Installation a breeze due to not needing air-flow over the Heatsink.

This compact and light-weight Voltage Regulator will definatley exceed your expectations!!!

Includes 16AWG Silicone Wire with Deans Compatible Connector.

Min. Input Voltage: 7.4v
Suggested Input Voltage: 7.4v - 11.1v*
Main Output Voltage w/ 7.4v: Adjustable 5.2v - 6.5v @ 10A
Main Output Voltage w/ 11.1v: Adjustable 5.2v - 8.5v+ @ 10A
Gyro/Tail Output Voltage: Constant 5v @ 1.5A
Max. Main Amp Rating: 16A
Max. Gyro/Tail Amp Rating: 3A
Heatsink Material: Aluminum
Length of Lead Plugs: 6" Each
Plug Type: Universal
Size: 60mm x 30mm x 9mm
Weight: 33.5g