Specifications:

Cell count: 2-6 Lipos
Operating voltage: 6-25V
Contin. current: 80A
max. current: ...to be defined...
max. RPM with 2-pole-motor: ...to be defined...
Size: 62x32x15mm
Weight without cables: 52g
Weight with cables: 84g
Cable cross-section: 4mm²
BEC current continuous: 5A
BEC current max.: 15A
BEC voltage: 5,5V
BEC adjustable with ProgCARD II: 5-6V
BEC short circuit protection
Auto Programming Mode
Stick positions programmable
Mode programming
ProgCARD ability
RPM Control
EMK brake can be disabled
EMK brake adjustable (for F3A)
Short circuit protection
False start protection
Current limiting
Overtemperature protection
Undervoltage cutoff
Undervoltage can be disabled
Undervoltage with automatic adjustment for NiCd / NiMH / Li-Ion / LiPo
Variable cutoff voltage / cell
Slow down instead of cutoff
Active freewheeling circuit
LED status display
Overload alarm
PWM frequency 8-32kHz
Total copper thickness 630µm
Reversable rotation direction

The JIVE offers a totally new concept that will convince you. It's functionality exceeds all you have ever heared about ESCs.

High-tech pack

Even the appearance shows that KONTRONIK strikes out in a new direction with the new JIVE ESC. Its integrated shockresistant housing made from a specific polyamide protects the JIVE ESC from mechanical damage and makes it waterproof. The plastic material has been developed especially for injection moulding of electronic parts without tensions or stress for the electronic components.

Power by coolness

Obvious is the huge cooling plate, the second new feature of these ESCs. This cooling plate is perfectly connected with the power parts, provides good heat transfer and enables additional cooling to be realized. It is possible to raise their performance enormously by installing an additional air or water cooling. The naming 80+ means: minimum 80A. With a good extra cooling it is possible to get up to double power.

BEC records

Further highlights are waiting inside the new JIVE ESC, for example the unbelievable strong BEC which is adjustable between 5 and 6V with ProgCARD II. It offers 5A continuous BEC current with 15A in peak. That's enough for all spectacular flight figures even in helicopters. To provide this power the JIVE ESCs have got two parallel BEC output jacks.

High-voltage surprise

Unique too is the BEC of the HV Types, which offers 5A continuous current with 15A peak current up to 12s (16-50V)! This after all allows a secure BEC usage for all applications up to 12s, of course without any voltage swing and without interferences - proven by thorough tests on out own EMV test bench.

"Attention", ESC shows initiative

Due to a second processor it was possible to excent the well-known JAZZ Software with some new leading features. For example the JIVE alarms the pilot after the flight, when it was used in overload regions in order to prevent a later malfunction.

You like an F3A brake?

Additionally an adjustable break was implemented, which allows F3A pilots to fly constant downward passages during their acrobatic figures.